Protect your employees, reduce the spread of virus
In the fight against the Coronavirus (COVID-19) that can be spread easily through surfaces, advanced Access Control technologies can ensure more than just efficiency, they contribute to the workspace security by offering monitoring, detection and reporting, as well as by controlling access of unauthorised entrants without any hygienic risk.
Door entry and access systems can be a particularly high-traffic area of buildings and offer a huge potential for cross-contamination if they are used by people carrying an infection or virus. Once further entrants to the building have picked up the virus on their hands, they can begin to spread it around the many other surfaces in the building, such as lift buttons, door handles and other surfaces.
Contactless Access Control provides a fast, accurate and safe way of identifying employees as they enter a site without the need for touching any surfaces such as a keypad, fingerprint reader, turnstile, or door.
Temperature Screening & Access Control
Combining Temperature Screening technology and Contactless Access Control, you can now monitor your entrances.
If an elevated skin-surface temperature is recognised, entry will be denied, prompting the individual to seek further confirmation using clinical measurement devices before entering.
Recommended Products
Hikvision Pro Face Access Terminal
• 7-inch LCD touch screen
• 2 MP wide-angle dual-lens
• Adjusts supplement light brightness manually
• Face recognition in dark environment
• Face recognition distance: 0.3 to 3 m
• Suggested height for face recognition: between 1.4 m and 1.9 m
• Deep learning algorithm
• 5,000 face capacity, 5,000 fingerprint capacity, and 50,000 event capacity
• Multiple authentication modes
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Imports card and user data to the device via TCP/IP communication
• Stand-alone operation
• Transmits data to the client software via TCP/IP communication and saves the data on the client software
• Capture linkage and captured pictures saving
• Imports data to the device from the client software
• Manage, search and set device data after logging in the device locally
• Connects to one external card reader or access controller via RS-485 protocol
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, indoor station, and master station
• Remote live view via RTSP protocol; encoding mode: H.264
• NTP, manually time synchronization, and auto synchronization
• Audio prompt
• Watchdog design and tamper function
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
Dahua Face Recognition Access Controller
• 7 inch IPS display, resolution 1024×600
• Support face unlock, IC card unlock, and password unlock; unlock by period
• With face detection box; the largest face among faces that appear at the same time is recognized first; the maximum face size can be configured on the web
• 2MP wide-angle WDR lens; with auto/manual fill light
• Face-camera distance: 0.3 m–2.0 m; human height: 0.9 m–2.4 m
• With face recognition algorithm, the access controller can recognize more than 360 positions on human face
• Face verification accuracy>99.5%; face comparison speed 0.35s per person; low false recognition rate
• Support profile recognition; the profile angle is 0°–90°
• Holds 50, 000 users, 50, 000 faces, 50, 000 cards, 50, 000 passwords, and 50 administrators
• Support liveness detection
• Support duress alarm, tamper alarm, intrusion alarm, door contact timeout alarm, illegal card exceeding threshold alarm, and more
• Support general users, patrol users, VIP users, guest users, and the disabled users
• With 4 unlock status display modes
Hikvision MinMoe Ultra Face Recognition Terminal
• Integrates rapid thermal imaging-based temperature screening functionality.
• Supports Vanadium Oxide uncooled sensor to measure target’s temperature
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
• Recognition distance: 0.5 to 1.5 m
• Fast temperature measurement mode: Detects face and takes temperature without identity authentication
• Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Displays temperature measurement results on the authentication page
• Triggers voice prompt when detecting abnormal temperature
• Configurable door status (open/close) when detecting abnormal temperature
• Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
• Suggested height for face recognition: between 1.4 m and 1.9 m
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Watchdog design and tamper function
• Audio prompt for authentication result
• NTP, manually time synchronization, and auto synchronization
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Imports and export data to the device from the client software
* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.* In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
Dahua Temperature Monitoring Access Control
• Temperature Accuracy: ±0.3°C ·2.5D curved screen • 7 Inch LCD display with resolution of 1024×600 ·2 MP CMOS, WDR
• Auto fill light reduces light pollution • Can hold 100,000 users, 100,000 face images, 100, 000 password, 50 administrators, and 300,000 records
• Support face and password unlock and unlock through their combinations • With face detection box; the largest face among faces that appear at the same time is recognized first; the maximum face size can be configured on the web
• Face-camera distance: 0.3 m–2.0 m; human height: 0.9 m–2.4 m (lens-ground distance: 1.4 m)
• With face recognition algorithm, the terminal can recognize more than 360 positions on human face
• Support liveness detection
• Face recognition speed: 0.2 s per face
• Accurate recognition in backlight and front light
• Various unlock status display modes protect user privacy
• Support enabling/disabling the thermometer; temperature measurement range is 30°C to 45°C; temperature measurement distance range is 0.3 m–1.8 m; temperature measurement error is ±0.5°C; temperature measurement accuracy is 0.1°C; report temperature anomaly alarm
• Support mask detection, report alarm of abnormal events without wearing a mask
• Support duress alarm and tamper alarm
• Support general users, patrol users, VIP users, guest users, and special users